User guide

DiscView PRO User Guide
124
Pioneer DRM-1004X Jukebox
Setting the Physical SCSI IDs
The DRM-1004X has a set of five switches on the rear panel
that are used for setting SCSI ID (see illustration). The first
four switches set the SCSI ID for each of the internal
CD-ROM drives. Drives 3 and 4 are optional — if not
installed, the switch settings will be ignored. The fifth switch
sets the SCSI ID for the jukebox changer mechanism
controller.
Each switch is a rotary switch. Using a small screwdriver,
turn the appropriate dial to the desired SCSI ID number ( 0
through 7).
SCSI ID
Switch
for the
jukebox
SCSI ID Switch
for drive