User guide

DiscView PRO User Guide
110
Building a FastCD Image
1. If it is not already loaded, load the CD you want to make
an image of in an available drive. The drive can be a lo-
cally attached drive, or a drive in a DiscPort Tower at-
tached to the server, or attached to a DiscPort host
attached to the server, for example. Do not mount the CD.
2. From the Map window, select the CD.
3. Select the Build FastCD Image option from the Tools
menu, or right-click on the CD and select Build FastCD
Image from the pop-up menu. The Build FastCD Image
dialog displays.
4. Click on the CD-ROM Image Information tab.
The CD-ROM Image Information Tab Section
CD-ROM Size indicates
the size in megabytes and
bytes of the CD-ROM you
are building an image of.
Disc Type displays the
format of the CD,
e.g ., ISO
9660, HFS, High Sierra,
etc .
NetWare Volume
indicates the default
NetWare volume where
the FastCD image will be
built, while the Image
Directory field displays the default path where the
image will be saved when it is built. These are the
defaults you set when configuring FastCD.
Available Disk Space indicates how
much hard disk space is remaining in
the location where the image will be
saved. If there isn't enough space to
build the CD image in the location
indicated, you will be warned.
5. Click on the Advanced Image Options tab.