User guide

OMNIScanner User Guide
7 - 2
another project or to change the Circuit ID.
Press ENTER with the Project: highlighted to reveal a
list of all projects that are currently stored. Use the
éê to highlight the project you want to store the
Autotest within, and press ENTER to select it.
Use the ê to highlight the Circuit ID: and press
ENTER to edit the field. Press ENTER to terminate
the edit mode.
Press (Save) to save the changes and return to the PROJECT
NAME screen. If the PROJECT NAME was changed, it will now appear in
the title bar together with the numeric test counter.
Viewing Autotest Results
The Project Name screen shows a Circuit ID and a PASS/FAIL icon for
each saved Autotest. The following PASS/FAIL icons can be displayed:
Passed twisted pair Autotest.
Failed twisted pair Autotest.
Passed twisted pair Autotest with graphs.
Failed twisted pair Autotest with graphs.
Passed fiber Autotest.
Failed fiber Autotest.
To view detailed information about a saved Autotest use the éê on your
keypad to highlight a Circuit ID in the Project Name screen and press
ENTER.