User guide

12 - 3
OMNIScanner User Guide
a different USB port, a separate installation of the driver from the Scanlink
Tools CD is required.
Uploading OMNIScanner2 Test Results to the PC
1. To send test results from OMNI Scanner2(s) to a PC, first turn your PC on.
2. Connect the PC with OMNIScanner2 via the high-speed USB cable.
3. Turn on OMNI Scanner2
4. Run the Scanlink software and click on the (Upload) button in the
toolbar, or select Upload in the File menu.
5. In the Scanner Type field, select OMNI Scanner.
6. Select the appropriate port (USB).
7. Click Upload to establish communications between Scanlink and
OMNI Scanner2 and upload the Autotest data that are stored in the
scanner’s memory.
8. Scanlink can
upload data from
several scanners at
once. If you have
more than one
scanner connected,
the USB Connec-
tion List will appear
and allow you to
select the scanners
you wish to upload
from. The
OMNI Scanner2s are
listed by serial
number. Select the
appropriate scanner(s) and click OK to continue.
9. If more than one Project is found, the Project List will appear and allow
you to select the project(s) you wish to upload. Make the appropriate
choice and press OK to continue the upload process.