User guide

A - 3
OMNIScanner User Guide
OMNIScanner Autotest Functions
· Full suite of tests to determine if cable meets generic cabling or
network type requirements.
• Extended performance range Cabling (CAT 6 and CAT 7)
• TIA: CAT 6 Link, CAT 5E Link, CAT 5E Channel,
CAT 5 Link 95 & 67 TSB, CAT 5 Channel 95 & 67 TSB,
CAT 3 Link, CAT 3 Channel, TIA 568A
• ISO/IEC: Class F Link, Class E Link,
Class D Link - 50173, Class D Channel - 50173,
Class D - 11801 - 95, Class C Link - 50173,
Class C Channel - 50173, ISO 11801 Equation
• Vendor: OMNIScanner supports several vendor specific Autotests
• MICROTEST: MT 300 MHz, MT 250 MHz
• IEEE: 10 BASE-T, 100 BASE-X, 1000 BASE-T, 16Mb Token Ring,
4Mb Token Ring,
1000 BASE-SX (50 micron), 1000 BASE-SX (65.2 micron),
1000 BASE-LX (50 micron), 1000 BASE-LX (65.2 micron),
100 BASE-F, 10 Base-FL, 10 BASE-FB, Token Ring
• ATM: ATM155 Mbps, ATM 51 Mbps,
ATM 155, ATM 155 SWL, ATM 622 (62.5 micron)
• FDDI
• Fiber Channel
• AS/NZ: AS/NZ D Link, AS/NZ D Channel, AS/NZ C Link,
AS/NZ C Channel
• ANSI: FDDI Orig. 62.5 uM, FDDI Orig 50 uM, FDDI L/C 62.5 uM,
FDDI L/C 50 uM, Fiber Channel 266 62.5 uM,
Fiber Channel 266 50 uM
OMNIScanner Test Functions
· Wire Map
· NEXT (Near End Crosstalk)
· Return Loss
· Attenuation
· ELFEXT (Equal Level FEXT)
· ACR (Attenuation to Crosstalk Ratio)
· Bandwidth
· Length/Delay
· Resistance
· Power Sum NEXT, ACR and ELFEXT