User guide

OMNIScanner User Guide
10 - 2
2. Turn OMNI Scanner off.
3. Plug the AC adapter into OMNI Scanner .
4. Turn OMNI Scanner back on.
You are now ready to download the new flash update from the PC. Follow
the instructions in the ReadMe that accompanies the update file.
5. To verify the software update, press and hold the Backlight key (located
right above the ESC key). The software version # will be displayed
Updating OMNIRemote Software from the PC
Note: The update process will erase all test results stored in memory. Use
ScanLink or MT Crimp for Windows to upload the results before updating
OMNIRemote’s software.
To update OMNI-
Remote with the files
you have down-
loaded from the
WWW to your PC
proceed as follows:
1. Connect the DB-9
end of the serial
cable to
OMNI Scanner ’s
serial port, and then
connect the DB-9 or
DB-25 end of the
serial cable to your
PC’s serial port.
2. Turn OMNI Scanner off.
3. Plug the AC adapter into OMNI Scanner .
4. Connect OMNI Scanner and OMNI Remote using the provided test cable.