User guide

9 - 1
OMNIScanner User Guide
Chapter 9 - Uploading and Printing
Microtest Utilities
Microtest Utilities consists of three parts: the ScanLink program, the
OMNI Scanner Configuration program, and the OMNI Scanner Remote
Control program.
ScanLink is designed to upload data measured with OMNI Scanner,
PentaScanner or CertiFiber. Collected data can be viewed, saved to disk,
or transferred into the MT Crimp for Windows database, where Autotests
can be managed. Autotest Certification and Summary Reports can be
printed from the PC to a printer or a file.
Note: MT Crimp for Windows products are available separately.
OMNI Scanner Configuration allows for easy setup and management of
projects, the configuration of OMNI Scanner , the specification of tests, and
the construction and structuring of cable libraries. Projects can easily be
downloaded to several OMNI Scanners .
OMNI Scanner Remote Control is designed to control OMNI Scanner from
your PC. It allows you to run Autotests that can be uploaded, viewed, and
printed. OMNI Scanner Remote Control contains an extensive graphing
utility allowing you to view and print saved graphs of uploaded test results.
Refer to the Microtest Utilities User Guide for detailed instructions about
the installation and the use of the application. The User Guide together with
the software is part of the OMNI Scanne r kit. If your kit did not include the
Microtest Utilities, they are also available for download from the Microtest
web site at www.microtest.com.