User guide

OMNIScanner User Guide
7 - 6
shown in Method B.
For Method C: Remove the middle launch cable without disturbing the
couplers.
Note: Once the reference value has been set,
ensure that both launch cables remain attached to
the fiber adapters. Remove the couplers without
disturbing the connection to OMNIScanner and
OMNIRemote. When setting the Reference using
Loopback or Method B, ensure that the TX (trans-
mit) connections are not disturbed.
Note: If the test configuration changes, a new
reference value needs to be established.
5. Once the reference values has been set, OMNI Scanner will display the
FIBER INFO screen.