User guide

OMNIScanner User Guide
4 - 12
result for each pair is tagged with a PASS or FAIL indicator.
Press or to toggle between Power
Sum ACR results for OMNI Scanner and OMNI-
Remote .
Press (Graph) to view the graph for the
currently highlighted pair. Attenuation and PSNEXT
are displayed for the frequency indicated by the
cursor position.
Press (Pairs) to view Attenuation and PS NEXT graphs for other
pairs.
Press ESC to exit the POWER SUM ACR screen.
Office Locator
The Office Locator function allows you to find the
termination of an office cable drop from a wiring
closet. It eliminates the need to trace cables through
walls and ceilings.
1. Connect the cable to be tested to OMNI Scanner .
2. Insert the RJ-45 Office
Locator adapters into wall
outlets in the offices you wish to identify. You can
connect any or all of the twelve Office Locators
before beginning your test.
3. At the patch panel, run the Office Locator function
to identify, which office is connected to a given port.
OMNI Scanner will identify office locations and
display the ID of the Office Locator adapter found at
the far end of the attached cable.
If you are testing a cable that does not have an
Office Locator attached at the other end, OMNI-
Scanner will display a question mark.
Press ESC to exit the OFFICE LOCATOR screen.