User guide

3 - 11
OMNIScanner User Guide
change the displayed values in increments of 1.
Use the è to highlight the Owner Name:. Press ENTER to start the edit
mode. You can enter up to 19 characters for the Owner Name. They will
appear on printed reports. Press ENTER to end the edit mode.
The USER OPTIONS screen displays the Language that is currently
selected. To change the language, use the è to highlight the field. Press
ENTER and use the éê keys to highlight a language. Press ENTER once
more to select it as the default language.
Press to save all settings and return to the SETUP screen.
Remote Info
Select Remote Info to display the REMOTE INFO screen.
The date the Reference value for OMNIScanner and OMNIRemote was
last set is shown at the top of the screen.
The Hardware and Software Versions, and the
Serial number of the remote unit are displayed.
The Battery status is represented as a gauge.
Factory Calibration* data is displayed at the bottom
of the screen.
You may need to provide Serial Number and Factory
Calibration data when having repairs or refurbish-
ments done, or when calling for Technical Support.
*OMNI Scanner and OMNI Remote should be calibrated annually with
specialized Microtest equipment. Contact Microtest Technical Support for
information on calibration and service requirements.
Press ESC to return to the SETUP screen.