User guide

OMNIScanner User Guide
3 - 10
box will be checked .
In the Save Graph Options section you will be able to define, which of the
graphs will be saved.
If a checkbox is checked , OMNI Scanner will store an Autotest with the
graph information for that particular test. Note: Saving graphs reduces the
number of Autotest that can be stored.
Depending on the performed Autotest, NEXT/PSNEXT, ELFEXT/PSELF-
EXT, Return Loss, and Attenuation graphs can be saved. Note: To view
ACR graphically, NEXT and Attenuation must be checked.
Use the éê to highlight the Save Graph Option checkboxes.
Press to select the graph to be saved.
Press (Save) to save your changes and return to the SETUP screen.
Press ESC to discard the changes and return to the SETUP screen.
User Options
Select User Options to display the USER OPTIONS screen. This screen
contains several user definable preferences.
Press ENTER to switch the Units: from Meters to Feet. Use the éê keys
to highlight the desired measurement unit and press ENTER to select it as
the default measurement unit.
Use the è to advance to the AutoShutoff: field and press ENTER. Select
YES if you want OMNI Scanner to automatically shut off after 10 minutes
when operated with battery power. Select NO if you don’t want to use the
function. Press ENTER to set the default.
To edit the Date use the è key to highlight the
portions you want to change. Press ENTER to edit
the highlighted segment. Use the éê keys to
change the displayed values in increments of 1.
To edit the Time use the è key to highlight the
portions you want to change. Press ENTER to edit
the highlighted segment. Use the éê keys to