User guide

3 - 9
OMNIScanner User Guide
Position 48) in the Last Circuit ID: field. Press ENTER to terminate the
edit mode.
The Circuit IDs will increment from right to left. The positions will change
first from 01 to 48. Next the Patch Panels will increase from 01 to 02. Last
the floors will increase from 01 to 12.
Press (List) to review the continuous list of Circuit IDs that where
just created.
MT-F01-PP01-P01 (1st Circuit ID to be used)
MT-F01-PP01-P02 (2nd Circuit ID to be used)
MT-F01-PP01-P03 (3rd Circuit ID to be used)
.
.
.
MT-F01-PP01-P48 (48th Circuit ID to be used)
MT-F01-PP02-P01 (49th Circuit ID to be used)
..
..
..
MT-F01-PP02-P48 (96th Circuit ID to be used)
MT-F02-PP01-P01 (97th Circuit ID to be used)
MT-F02-PP01-P02 (98th Circuit ID to be used)
.. .
.. .
.. .
MT-F12-PP02-P48 (last Circuit ID to be used)
Press
(Save) to save the Circuit ID and return to the PROJECTS screen.
Press ESC to return to the SETUP screen.
Autotest Options
Select Autotest Options to display the AUTOTEST OPTIONS screen.
With the presented options you are able to further customize the way
OMNI Scanner will perform an Autotest for twisted pair cabling.
Press if you want OMNI Scanner to abort the
Autotest if a FAIL occurs. The Abort on Fail box will
be checked .
Use the ê to highlight the next checkbox.
Press if you want OMNI Scanner to automati-
cally move to the failed test result. The Jump to Fail