User guide

OMNIScanner User Guide
3 - 8
Press (Edit) to edit an existing project and its
Circuit ID.
The project name will appear in the Name: field. The
first and last Circuit ID fields contain a default circuit
ID that can be modified.
Press (List) to display the Circuit ID screen.
It contains a scrollable list of all Circuit IDs created
for the project.
Press (New) to create a new project.
New Project will be displayed in the Name: field.
Press ENTER to edit the name. The first and last
Circuit ID fields contain the default Circuit ID from
the Project that was highlighted when the (New) key was pressed.
Note: New and edited project names are placed at the bottom of the list in
the PROJECTS screen. OMNIScanner can store up to 16 projects.
Editing a Circuit ID
To edit or create a Circuit ID, highlight an item in the PROJECTS screen
and press (New) or (Edit).
Use the ê to highlight the First Circuit ID: field and
press ENTER.
The Circuit ID consists of 16 characters, which
allows the sophisticated construction of Circuit IDs.
Each character can be incremented.
The example shows how to quickly create an incre-
mental Circuit ID.
Enter MT-F01 (MICROTEST - Floor 01) -PP01 (- Patch Panel 01) -P01 (-
Position 01) in the First Circuit ID: field. Press ENTER to terminate the
edit mode.
Use the ê to highlight the Last Circuit ID: field and press ENTER.
Enter MT-F12 (MICROTEST - Floor 12) -PP02 (- Patch Panel 02) -P48 (-