User guide

2 - 7
OMNIScanner User Guide
field, and press ENTER to initiate the editing
mode. (See Chapter 1 - Introduction: Editing
with OMNIScanner for more information.)
5. To change the Name using the list function,
press (List). The CIRCUIT ID screen
opens and displays all Circuit IDs available for
the project. Use the ç or è to quickly scroll
through the pages. Use the é or ê to highlight a
Circuit ID and press ENTER to select it as the name for the Autotest to be
saved and return to the SAVE AUTOTEST screen.
6. Press (Setup Autotest Options) to
open the AUTOTEST OPTIONS screen and
select or unselect the graphs to be saved. (See
Chapter 3 - Setup: Autotest Options for more
information.)
7. Press (Select) to select or unselect an
item
8. Press (Save) to save the new settings and return to the SAVE
AUTOTEST Screen
9. Press (Save) or (Save Graphs).
The (Save) function is available, if no graph data is selected to be
stored.
The (Save Graphs) is available, if any Graph option is selected to
be stored. (See Chapter 3 - Setup: Autotest Options for more information
on storing graphs.) Note: Saving graphs will reduce the number of Auto-
tests that can be stored.
10. Press ESC to return to the Autotest screen without saving the Autotest.
11. To run the next Autotest press the
AUTOTEST
key.