User guide

OMNIScanner User Guide
1 - 12
Product Versions
To display the software version #, the hardware
version #, the serial #, and the factory calibration
data for OMNI Scanner, press and hold the Backlight
key. The CONTRAST screen will be displayed, which
contains information that you may need to provide
when calling Technical Support.
To display software, hardware and serial number
information for OMNI Remote, connect the units with
the supplied test cable and press the function
key.
Select Remote Info to open the REMOTE INFO
screen, which contains the date the reference was
last set, the hardware and software information, the
serial number, the battery indicator, and the factory
calibration data.
The serial number can also be found on the back of
each unit.
Select Fiber Info to open the FIBER INFO screen,
which contains the serial numbers and the date the
adapters were last factory calibrated.