User guide

OMNIScanner User Guide
1 - 10
Editing Numeric Fields with the Spin Control
1. Use the é or ê arrow keys to move the cursor to the field to be edited.
The entire field will be highlighted in black.
2. Press ENTER. Notice that the field is now high-
lighted in white and the main screen in the back-
ground turns gray to indicate that the edit mode has
been launched.
3. Press the é or ê arrow keys on your keypad to
scroll through the string of numbers.
4. Press ENTER or ESC to accept the value and terminate edit mode.
Editing Alphanumeric Fields
To start the editing procedure for fields that contain alphabetic and numeric
characters use the alphanumeric keypad.
1. Use the é or ê arrow keys to move the cursor to the field to be edited.
The entire field will be highlighted in black.
2. Press ENTER. Notice that the field is now highlighted in white and the
main screen in the background turns gray to indicate that the edit mode
has been launched. The first letter in the field is highlighted in black.
3. Press the 8 key on your keypad to display a small
drop-down list containing the letters t, u, v and the
number 8.
Note: Alphabetic and special characters are printed
above each numbered key on the keypad. For
example, ABC is printed above the 2 key.
4. Use the é or ê arrow key to move to the appropriate character, or
simply press 8 on your keypad repeatedly until the appropriate letter or
number appears in the highlighted field. Press the
A/a
key to toggle
between uppercase and lowercase letters.
5. Press the è to close the drop-down list and highlight the next letter to be
edited. Notice that OMNI Scanner does not overwrite existing characters.