User guide

OMNIScanner User Guide
1 - 8
OMNIFiber’s LED Indicators
LED Color Description
850nm Green OMNIFiber is transmitting
at 850 nm
850nm Green (flashing) OMNIFiber is transmitting
modulated light at 850 nm
850nm Orange Part 1 of Two Way test
completed, switch fibers
1300/ Green OMNIFiber is transmitting
1310nm at 1300/1310nm
1300/ Green (flashing) OMNIFiber is transmitting
1310nm modulated light at
1300/1310 nm
1300/ Orange Part 1 of Two Way test
1310nm completed, switch fibers
Attaching the OMNIScanner Fiber Adapters
Note: Both OMNIFiber adapters have dust cabs to protect the ST connec-
tors from dirt. Keep the ST connectors covered when the Fiber Adapters
are not in use. This helps to ensure that contaminants from handling fiber
do not affect test measurements.
Note: Both OMNIFiber adapters have 160 pin connector covers. Keep the
160 pin connectors covered when the Fiber Adapters are not in use.
To attach a fiber adapter to OMNI Scanner proceed as follows:
Note: Refer to the graphics in Chapter 2 - Getting Started: Typical Test
Configurations for instructions on connecting OMNIScanner and OMNI-
Remote for basic link and full channel tests.