Owner's manual

MICROTEL CellStat

APPENDICES

APPENDIX A: Technical Specifications

A.1 Communications

Phone Interface: ACTA ID:

US: 7AAAD00BDS65616

For connection to PSTN

Ringer Equivalence Number: 0.0B

Cellular Interface: Enabled with installation of a GSM SIM card and

External antenna (usually done at factory); front-

panel cellular status indication and volume control.

Cellular Approvals: Cingular Wireless Approved; Rogers Wireless

Approved; T-Mobile Wireless Network Compatible

LED Indicators: Dialer Active/Ring Detect/Call Progress

Local Telephone Off-hook/Ready to program

Fault/Normal status for each input channel

Cellular Status: signal strength or call in-progress

AC Power/Charging

Dialing Capacity: 8 Phone Numbers, 30 Digits Each

Wireless Email Alert to a single email address

Tone or Pulse Dialing via the PSTN

Special Sequences for Selection of Pulse/Tone,

Pause, Pagers, Auto-Acknowledging Alarms,

Cellular callout, cellular SMS Text Message Alert.

Call Progress Detection Dial Tone Detect

Busy Detect

Ring Back/No Answer Detection

Answer Delay: 1-99 Rings (Call Back Acknowledge) via PSTN

1 – 3 rings via the buit-in cellular interface.

A.2 Electrical

Input Power: 1.5 W @ +12 VDC via UL/CSA-approved

Plug in wall-transformer (supplied);

12 V Solar Power Interface Compatible

On/Off Switch