Specifications

H. POWERING UP THE SYSTEM

NOTE: IF THE UNIT ABOUT TO BE POWERED UP FOR THE FIRST TIME

CONTAINS HARDWARE FOR OPTIONAL FEATURES, READ THE

SUPPLEMENTARY INSTRUCTION MANUAL FOR THOSE FEATURES BEFORE

POWERING THE UNIT UP FOR THE FIRST TIME.

After the system has been mounted in a suitable area, the battery installed and power,

telephone and fault sensing lines connected, it may be powered up by switching the

POWER switch to the ON position. This switch is on the system’s front panel. When

the unit is powered up, the front panel indicators will flash in sequence for a few

moments and the system will say “system ready”. If this does not happen, turn the

switch to the OFF position, disconnect the power and the telephone line from the unit.

Contact a qualified service person or Microtel, Inc. for instructions.