System information

MICROTEL Series 1000EX Dialer

APPENDICES

APPENDIX A: Technical Specifications

A.1 Communications

Phone Interface: FCC 68 Registration Number: 1QEUSA-21532-AL-E

Pass-through Phone Handset

Cellular Phone Connection or equivalent.

Ringer Equivalence Number: 1.2B(ac)

LED Indicators: Dialer Off-hook/Ring Detect/Call Progress

Telephone Off-hook/FAX-in-progress

System Status/Power-fail

Dialing Capacity: 9 Phone Numbers, 60 Digits Each

Tone or Pulse Dial

Special Sequences for Selection of Pulse/Tone,

Pause, Call Progress Detection, Turning ON/OFF

Output Modules, Auto Acknowledging Alarms,

Communicating with FAX machines or Computers.

Call Progress Detection Dial Tone Detect

Busy Detect

Ring Back Detection

Quiet/Voice/Answer/Pager Terminal Tone detect

Answer Delay: 1-99 Rings (Call Back Acknowledge)

Fax: Group 3 Fax Compatible

Single-page Alarm Status or Dialer Configuration

Reports

A.2 Electrical

Input Power: Plug in Wall Power Supply, 120 VAC to 14.5 VDC

UL/CSA approved.

or 12-16VDC @ 0.5 Amp (Dialer only)

or 14.5-16VDC (Dialer with Battery)

Solar Power Interface Compatible

Power On/Off Switch

Power-fail Indicator

Externally Accessible Fuse

Optional: Surge Suppresor

Battery Operational: 12 Volt 2.2 AH Lead Acid Battery Option