User`s manual

34 XT3500 User's Manual
• To stop the current scan job and start a new scan job, press the “Batch
scan completed” button. The scanner will stop scanning and then save
the scanned images in one file. When done, it will start to process a new
scan job consecutively. The new scan job will be named automatically in
a consecutive file number order.
If the new assigned file name has already existed in your system, a
window will pop up to remind you that if you want to overwrite the
existing file with the new scan job. If yes, press the “OK” button to start
scanning. If no, press the “Cancel” button to exit the Auto Scan mode.
• To stop the current scan job and quit the auto scan, press the “Stop”
button. The scanner will stop scanning, save the scanned images in one
file, and then quit the Auto Scan mode.
5. If the “Book Mode” option is checked, choose an opening direction of the
book from “Left-hand open”, “Right-hand open”, and “Upward open”; then
press the “Save” button.
An “Automatic Paper Sensor” window
appears on the screen.
Follow the instructions and graphs in the
window to scan the cover page, even
pages and odd pages of the book.
After you finish the scan, press the
“Batch scan completed” button to stop
current scanning and save the scanned
images in a single file with an assigned
file name.
Afterward, when the scanner detects a material on the scan bed, it will
automatically start a new scan and save the scanned result in a newly named
file. The scanner repeat the scanning and file-saving action until you press
the “Stop” button to quit the Auto Scan mode.
For more details, please refer to a PDF document named “ScanWizard DI
Reference Manual” in your Microtek software CD-ROM and see the Auto Scan
section.