User`s manual

XT3500 User's Manual 33
Activating Auto Scan
The Auto Scan function activates the paper sensor of the scanner; therefore, the
scanner can detect and scan documents automatically based on a predefined time
interval. This function is available only when the scanner is equipped with a
paper detecting sensor.
1. Place the document to be scanned on the scanner glass surface.
2. Launch ScanWizard DI in stand-alone mode by clicking the program icon on
the desktop.
3. Follow the procedures (steps 3 through 7) for “Scanning a Single-sheet
Document” to specify your scanning requirements.
4. Click the Scan To button and hold down the mouse until the Options menu
appears, then select Auto Scan to open the “Auto Scan: Save As” dialog box.
In the “Auto Scan: Save As”
dialog box, specify the following
settings:
a) Key in your preferred file
name in the “File prefix” edit
box, or use the default
“Image” as a root file name.
b) Select your required export
file format. Save the file as
TIF, PDF, or DCX, which
enables the “Save multiple
images as a single file”
option in the next step.
c) Check the “Save multiple
images as a single file”
option to store all the
scanned images as a single
file if desired.
d) Based on your needs, you can check the “Enable Book Mode” option or
not.
5. If the “Book Mode” option is unchecked, press the “Save” button now. A
window appears on the screen to remind you that please put the document to
be scanned on the scan bed.
By dragging a slide-bar, you can specify the time interval (among 0 and 6
seconds) to control the auto scan according to your preferences.