User`s manual

XT3500 User's Manual 23
Scanning a Book in Book Mode
The Book Mode in ScanWizard DI is quite helpful when you want to scan a
physical book and save it as an electronic file. The scanned result can be used
directly as an E-book and you do not need any editing software to maintain it
later.
1. Launch ScanWizard DI as a stand-alone by clicking on the program icon on
the desktop.
2. Follow the procedures (steps 3a through 3e) for “Scanning a Single-sheet
Document” to specify your scanning requirements in the ScanWizard DI
control panel.
3. Follow the step 6 for “Scanning a Single-sheet Document” to select your
image type in the Attribute drop-down menu.
4. If necessary, adjust image quality by using the image correction tools.
5. Click the Scan or Scan To button to open the “Scan To: Save As” dialog box.
In the “Scan To: Save As” dialog box, specify your requirements, then check
“Enable Book Mode” option.
a) According to the opening direction of a book, you can choose “Left-
hand open”, “Right-hand open” or “Upward open” to scan your book.
To select any of the three options, move your cursor toward it and click.
The selected option will be highlighted.
When done, press the Save button to activate the Book Mode.