User`s manual

16 XT3500 User's Manual
Positioning Documents
This section shows you how to position a single-sheet document, such as
contact sheets, large pieces of art, and mechanical blueprints, on the flatbed.
1. Raise the scanner lid.
2. Place the document to be scanned facing down on the glass surface of the
scanner. Align the top of the document along the horizontal ruler on the
scanner.
3. Lower the scanner lid.
F1
F2
F3
SCAN
COPY
OCR
0
10
20
30
40
50
60
70
80
90
100
110
120
130
140
150
160
170
180
190
200
210
F1
F2
F3
SCAN
COPY
OCR
10
01'
2'
020304050
To scan a single-sheet of
document:
With the document facing
down on the glass surface of
the scanner, align the top of
the document along the
horizontal ruler on the
scanner, using the arrow
printing mark on the
horizontal ruler as a reference
point.
To scan a book or thick
documents:
You may lift up the scanner
lid out from its hinge sockets.
Then, align the inner margin
of a book along the side of
the glass surface of the
scanner as indicated in the
graphic, using the arrow
printing mark on the
horizontal ruler as a reference
point.