OPERATIONS MANUAL Wireless Ethernet Systems

POWER INJECTION MODULE (PIM)

Note: The Power Injector Modules are not weatherproof units and must be protected from moisture.

PIM DESCRIPTION

A. TOP VIEW

1. ETHERNET IN – Connect to Ethernet device

2. POWER IN – 12-20 VDC Center Positive

3. ETHERNET OUT – Connect to Host/Client

B. RIGHT SIDE VIEW

1. POWER LED – Lit when power is on

2. ETHERNET OUT – Connect to Host/Client

3. POWER IN – Connect to Power Supply

12 3

C. LEFT SIDE VIEW

1. ETHERNET IN – Connect to Ethernet device

- 5 -