Technical information

* This UPS is designed for computer, printer and fax only. Connecting other equipments may cause the UPS to behave abnormally.
* Do not add equipment that have not been designed for these UPS.
* During a lightning storm, unplug the UPS from the wall outlet.
ON INSTALLATION
1. Do not allow anything to rest on the power cord and do not place the UPS
where the power cord is subject to damage.
2. Do not use this UPS near water such as near a bathtub, washbowl, kitchen sink, laundry tub, in
a wet basement, or near a swimming pool.
3. These UPS are provided with ventilation openings in the cabinet to allow the release of
heat generated during operation. If these openings are blocked built up heat
can cause failures which may result in a fire hazard.
Therefore, NEVER :
1. Block the bottom ventilation slots by placing the UPS on a bed, sofa, rug, etc.
2. Place the UPS in a built in enclosure unless proper ventilation is provided.
3. Cover the openings with cloth or other material.
4. Place the UPS near or over a radiator or heat source.
ON CLEANING
1. Unplug and Switch Off the UPS before cleaning the outer surface.
2. Use a slightly damp (not wet) cloth.
ON RE-PACKING
1. Do not throw away the carton and packing materials. They make an ideal container in which to pack and transport the unit, when
shifting the unit to another location.
5