Technical information

Section 3
Important Precautions
These UPS have been engineered and manufactured to assure your personal safety, but improper use can result in electrical shock or fire hazard.
In order to achieve the safeguards incorporated in these UPS, observe the following basic rules of safety, installation, cleaning and repacking.
ON SAFETY
1. Operate the UPS only from a power source mentioned in the technical information of this manual(Refer Section-7). The equipment
must be earthed at all times while in use.
2. Do not plug UPS's power cord into itself, which will result in a safety hazard.
3 Overloaded AC outlets and extension cords are dangerous, so are frayed power cables and broken plugs. They may result in a
shock or fire hazard, call your service technician for replacement.
4. DO NOT OPEN THE UPS : There are no user serviceable components inside. There are dangerous high voltages inside, even
when the power is off. Contact your authorised dealer if the UPS is not operating properly.
5. Do not put the UPS under the Sun directly for avoiding any possibility of damage.
6. Replace batteries and fuse only with the same type and rating.
7. Disconnect batteries during maintenance.
8. To avoid personal injury :
* Do not place the UPS on a sloping shelf unless properly secured.
* Use a perfect stand to hold the UPS.
9. To prevent fire Hazards :
* Always turn the UPS OFF, when you leave the room for more than a short period of time. Never leave
the UPS ON, when leaving the house.
* Keep children away from dropping or pushing objects into the UPS's cabinet openings. Some internal
parts carry hazardous voltages.
4