Technical information

Section 6
Connection of the equipment to UPS (Rear Panel)
Power Cord : For connecting UPS to Mains. Ensure
that the UPS is supplied Power from a Grounded
Socket Only.
UPS Outlet : There are three pieces of standard 5
pin outlet for connecting the AC power cord of the
computer.
A.C. Fuse:
This is for protecting the UPS & computer connected
to the UPS, in case excess current is drawn from AC
input. If the AC fuse is found defective, please be sure
that it is replaced only by a compatible fuse of the
same type & size. Fuse rating is mentioned below.
Recommended AC Fuse Rating :
- 8Amp(size 5x20mm)
Fast Blow Type
A. C. FUSE
F8AL-250V
A. C. FUSE
9
2 BATTERY DOUBLE POWER UPS
HERITAGE /
HERITAGE GOLD /
BRAVO