User`s manual

Reference: The Preview Window 53
Auxiliary information and Handy buttons
Preview image resolution
This shows the image resolution for the Overview or Prescan image. The
preview image resolution will change, according to the size of the preview
window and the amount of available memory. To resize preview window, drag
any side or corner of the window.
Zoom scale
This shows the zoom factor, or how many times the image has been magnified
using the Zoom tool or the Zoom in / Zoom out icons to the right of the Zoom
scale. You may select the exact Zoom scale from here.
Zoom-out
This lets you reduce a zoomed-in or magnified image one level down with each
click, up to the minimum 100% view.
Zoom-in
This lets you magnify or enlarge the image one level up with each clickEach
time you click, up to the maximum 1600% view.
Flasher for High and Low Value Markers
When the overview or prescan image is displayed, the High Value and Low
Value Markers are shown. If the two markers cannot be visually detected with
ease (depending on how your image may obscure the markers), clicking the
flasher activates the markers to flash a few times for easier detection, allowing
their locations on the oveview or prescan image to be seen.
Flasher for High and Low Value
Markers
Zoom in
Zoom out
Zoom scale
Resolution for
Overview or
Prescan image