User`s manual

Reference: The Preview Window 27
C. High and Low Value Markers
This lets you adjust the settings that define the High Value Marker (shown as a
black circle) and the Low Value Marker. The High Value Marker is shown as a
black circle in your preview image, while the Low Value Marker is shown as a
white circle. You can specify the range of the markers to either the entire
preview (by selecting the “Overview or Preview image” option) or to only
within the scan frame (by selecting the “Current Scan Frame”).
In the White/Black Points Setup window, clicking the “Preview” button will
obtain instant results; clicking the “OK” button lets you exit from the Setup
window and applies the High and Low Value Markers setting you have made to
the preview image.
B. Output Levels
The Minimum Output Level lets you set the minimum output level of the black
point. The higher the percentage value, the lower the contrast will be.
The Maximum Output Level lets you set the output level of the white point. The
lower the percentage value, the lower the contrast will be.
LCH Color Mode
Native Color Mode
LCH Color Mode
Native Color Mode