User`s manual

Reference: The Preview Window 13
Scanner Driver Manager
The Scanner Driver Manager keeps track of the scanners being used on your
system and the bus / ID numbers occupied by the scanners. By keeping a record
of this information, the Scanner Driver Manager allows ScanWizard Pro to start
up more quickly, as there is no need to look for scanners that are anot available.
When ScanWizard Pro is run the first time, all connected scanners are added to
the list.
To add a scanner:
Follow the hardware installation instructions for connecting a scanner to your
system. You can then use the Scanner Driver Manager in ScanWizard Pro to
add or include the connected scanner to your scanner list.
Note: You will have to follow the steps below if you change hardware
configuration such as the SCSI ID or SCSI bus.
1. Go to the Scanner menu in the Preview window, and choose Scanner
Driver Manager. A dialog box will appear showing the current scanner list
with the corresponding SCSI, USB, or FireWire bus/ID number.
2. Click the Find Scanners button. In case you have added new scanners, the
newly found scanners will be appended to the scanner list. If a scanner on
the list is not detected (not turned on, not ready, or removed from the
system), the model will not be removed from the list but will have a
question mark before it. See below for details on how to remove a scanner.
3. Click the Close button to close the dialog box.
Note: For USB and
FireWire scanners,
you will have to follow
the steps below if you
unplug the scanner at
any time during the
ScanWizard Pro
session.