User`s manual

Reference: The Advanced Image Correction tools 97
To move the From color sector without changing the hollow dot position, press the Shift key and click
inside the sector. When the pointer changes to a hollow cross, drag the sector to a new position. You will
see that the sector can only be expanded or contracted in a limited fashion, as it is constrained by the
position of the hollow dot. If you need to move the sector around, you will also need to reposition the
hollow dot, which then changes the Chroma and Hue (C&H) values.
Likewise, you can move a defined lightness range of the From color along the Lightness bar without
moving the From slider (fixed L value). Press the Shift key and click inside the lightness range. When
the pointer changes to a hollow cross, drag the lightness range vertically to its new position. Note that
the lightness range cannot go beyond the fixed “From” slider position.
More Tips on using the Selective Color tool
“From” color
slider
Lightness bar
"To” color slider
Range (the blue bars) within
which the lightness can be
moved without actually
touching the "From” slider.
You can move the bars up or
down the slider to define the
lightness range to be affected
To color
preview
From color sector To reposition From color
sector without moving the hollow dot, press the
Shift key and click, and drag the sector around
the hollow dot position. The sector cannot
break away from the fixed position of the
hollow dot.
From color
preview
Hollow dot