User`s manual

Reference: The Advanced Image Correction tools 95
How to use the Selective Color tool
1. Define a From color setting with the following steps:
A. Click the New button. For the first color to be changed, this step need
not be performed. Each subsequent color to be changed, however,
requires this step.
B. Select the color to be altered with any of the following methods:
1) Click the round eyedropper tool in the AIC screen, then go to your
prescan image in the Preview window and pinpoint the color to be
altered.
2) Click the color wheel to select the From color; the selected From
color will be enclosed in a sector. Within the sector is a hollow dot, and
the position of the hollow dot corresponds to the From color Chroma
and Hue values. If you wish to change the C & H values, click a new
spot within the sector.
3) Enter numerical values directly in the From LCH edit boxes.
Positionof hollow dot corresponds
to “From” C & H values
Round eyedropper
New button
Selected From color is
enclosed in a sector
with a hollow dot in it.
Resizing this sector will
change the ∆LCH
values in the edit boxes
“From” LCH
edit boxes