Instruction manual

insert the holder into the lower compartment of the Bio-5000 Plus.

Note: The Leak-Free Glass Holders require regular cleaning. To clean, use mild

glass cleaning solution, and wipe the glass plate gently with lint-free, lens-cleaning

cloth to prevent leaving fiber residue.

4.1. Positioning Electrophoresis Gels

This procedure applies when you use the lower scan bed of the Bio-5000 Plus to

scan the electrophoresis gels.

Using the Leak-Free Glass Holder

1. Place the electrophoresis gel to be scanned on top of the glass surface of the

Leak-Free Glass Holder.

2. Insert the holder all the way into the transparency bay (lower compartment) of the

scanner. Make sure the holder is inserted correct side up.