Instruction manual

5
2.4. Packing List
• Bio-5000 scanner Plus
• Hi-speed USB cable
• Power cord
• Vinyl stickers with Microtek logo
• Software CDs
• 2 Leak-free glass holders
3. Installation
3.1. Software Installation
Important: Do not remove the yellow sticker from your scanner until you are told to
do so. You must install software before connecting your scanner to the computer!
Always close any open programs, and turn off Anti-virus utilities before installing
software.
1. Place the Adobe CD-ROM into the CD-ROM drive and install the software. Skip
this step if you have a newer version of Photoshop Elements already installed
on your computer.
2. Place the Microtek software CD-ROM into the CD-ROM drive and follow the
on-screen instruction to install the driver and software.
NOTE: If the Microtek software Installer screen does not come up automatically, double-click the
following in succession: “My Computer”; the CD-ROM icon; the cdsetup.exe to start the installer
program.
3. Restart your computer at the end of all software installation.
3.2. Arrestor for Transport
3.2.1. Unlock the Scanner
Before you can operate the scanner,
you will need to unlock the scanner. To
unlock
the scanner, follow the steps below:
1. Remove the yellow “Unlock” sticker
from your scanner.
2. Look for the unlocking screw at the
bottom of the scanner.
3. Using a screwdriver, push and turn
the locking screw counterclockwise
to the unlock position.