Instruction manual

14
c) Adjust the scan frame settings if necessary.
8. Adjust image quality if necessary, using the Advanced Image Correction (AIC)
tools.
9. If the colors in your reflective original are faded and need restoring, check the
“Automatic Color Restoration” box in the Settings window.
10. Click the Scan (or “Scan to”) button in the Preview window to start scanning.
• If ScanWizard Bio was launched from an application program, the image is then
delivered to your application, where the image can be saved, printed, or edited.
• If ScanWizard Bio was launched in stand-alone mode, you will be prompted to
specify the file attributes for the scanned image after the Scan or Scan to button is
pressed, such as entering the file name, specifying a folder name of your own, etc.
When you have completed the settings, press the Done/Save button, and the
scanner will automatically scan and save your image based on your settings.
5.4. Scanning Originals Applied with Auto Focus
By default, the Auto Focus function is
activated when your Scan Material is set
as Positive Film or Negative Film. It is
disabled when your Scan Material is set
as Reflective. If you like to apply the
Auto Focus function to your reflective
originals, such as photos or prints, you
need to go to the Preferences menu and
to select the “More” command, and
select the Auto Focus to activate this
function.