Instruction manual

13
5.3. Scanning Reflective Originals
1. Raise the scanner lid, and place the reflective
original to be scanned face down
on the scanner glass bed, towards the front of the
scanner. Center the top of the original along the
horizontal ruler on the scanner.
2. Launch ScanWizard Bio either as a stand-alone
by clicking on the program icon, or by using the File-
Import or File-Acquire command from your image-editing program.
3. Go to the Preview window of ScanWizard Bio, and choose Reflective from the
Scan Material menu.
4. Click the Overview button to perform a preliminary scan of the image, which will
appear in the Preview window.
5. Select the Scan Frame tool from the Toolbar in the Preview window, and choose
the area to be scanned by dragging a rectangle around it. You will see a flashing
frame (marquee) around the selected area.
6. Click the Prescan button to display a detailed image area selected via the Scan
Frame tool. A thumbnail of the image appears in the Scan Job Queue window as
well.
7. Specify your scanning requirements in the Settings window.
a) Select a desired image type.
b) Select a desired resolution.