Specifications

20 Microtek ScanPotter Reference Manual
Calibrate Scanner
Calibrate Scanner button lets you calibrate your scanner before performing a
scan job. The button will be activated only when the scanner you purchased
supports the calibration function. Also, if the scanner connected support Smart
Calibration, ScanPotter will enable a window of further calibration settings for
you to select.
Calibrating the Scanner Directly
If your scanner does not support Smart Calibration function, when you click the
Calibrate Scanner button, a window will pop up on the screen to check whether
you like to calibrate your scanner. Depending on the scanner models
purchased, you may see different styles of the calibration window. Just follow
the instructions in the calibration window to finish the calibrating procedures
step by step.
Calibration window for ScanMaker s270
Calibration window for ScanMaker 3200XL