Specifications

DRAFT

•Within 12 minutes after the close down check is completed.

Press [YES] key to got to the Operation mode.

•During the start up or the shutdown of PC

(For 5 minutes “after 12 minutes have passed after the Close down check”,

For 5 minutes after the temperature adjustment is started.)

In this situation, do not start-up the PC.

The forced termination is done by pressing the power

switch of PC, and the PC may be defective.

•“The shut down of PC is completed” – “During the program timer” – “Before

starting up the PC”

(“17 minutes after the close down check is completed” to “the time to start the

temperature adjustment”)

The PC is started-up by pressing the system switch, and then the QSS software

starts up and the power supply is turned ON to the printer/processor/scanner

section.

How to start-up except from the program timer

(when the breaker is turned ON)

Important

QSS-30-3