Specifications

DRAFT

Changes from the conventional machines

QSS-30

Added the SM Forced replenishment function

To reduce what the processing solution remains in the SM Replenishment package

When one of the replenishment solution is run out, replenish the other solution in the same package compulsory

to the processing tank

This enables you to replace the package when the package is empty.

When using the SM forced replenishment function, mark the check box of “SM replenishment setting” of

“Machine Specification”

The limit amount of the forced replenishment is set in the [SM Forced Replenishment Amount setting] of

[Total Replenishment Amount].

The attention “Replace the Replenishment Package with a new one” will appear in the following conditions.

During printingONForced Replenishment was carried out.708

IdleONForced Replenishment was carried out.707

During printingNo conditionForced Replenishment was carried out.705

No condition

SM Replenishment

setting

No conditionAttach the replenishment package.701

IdleForced Replenishment was not carried out.700

Status of machineThe condition of occurrenceAttention No.