Specifications

DRAFT

Paper zigzagging adjustment

in the Printer section

As for the paper zigzagging adjustment, follow the procedure below.

1. Zigzagging of paper which is supplied from magazine mount A

* Make a test print in the [Arm unit zigzagging correction], and adjust

the zigzagging.

2. Zigzagging of paper which is supplied from magazine mount B

* Set the magazine of magazine mount A onto magazine mount B, and

carry out the zigzagging adjustment like procedure 1.

*If the zigzagging amount is not the standard value, adjust the position

of receiving pin (Paper supply unit B).

IMPORTANT******

After adjusting the pin holder of magazine,

confirm that the magazine can be set smoothly.

QSS-30-6

Screws (loose)

Pin holder