Specifications

DRAFT

2. Reverse Unit Upper Stop Position Correction

Point 1: Adjust the position of reverse unit so that the opening between

“Reverse unit (Left) E side” and “Processor insertion unit D

side” is 0 to 2 mm.

Point 2: For the Reverse unit (right), input the same correction value

with Reverse unit (left).

Maintenance/Adjustment (Paper advance section)

QSS-30-6

Processor insertion unit

Reverse unit (Right)

(G side)

+ correction

- correction

Reverse unit (Left)

(E side)

Opening 0 to 2 mm