Specifications

Explanation of modes

• Explain the modes, checking the actual machine.

3040

33_3

Explanation

• Paper temperature change correction

R light changes by the temperature change of inside of laser unit and surrounded temperature.

The color development of paper may be different.

In this case, input the correction value in the “Paper Temperature Correction”.

Corrections:Refer to the Operator's Manual - Additional Operations & Setup Manual -

"Correcting the paper coloration due to the temperature variations [Paper Temperature

Correction]".

• CCD Noise Suppresion Strength: Correction which is effective only for Under/Over part of

films.Noise is likely to occur in parts where there is not much light, so the correction is done

only for the part.

Note

• As for the setup and mechanical adjustment, carry out the practical training, so skip the

explanation here.