Specifications

Daily setup flow

Make a test print. (22-step setup print)

Colorimeter calibration (auto)

Sensor LED Light Intensity Adjustment

Measure a test print

When the light source

upgrading (auto) is

carried out correctly

during the program

timer

Light source upgrading

When the light source

upgrading (auto) is

not carried out

correctly during the

program timer

3020

33_3

Registration

Explanation

• After exposing the test print, the calorimeter calibration will be executed automatically.

• The light source update is executed automatically for the carrier to be set during the program

timer.

e.g.) When 240 lane is set: 240 light source update is executed.

When 120 AFC is set, 120 light source update is executed.

• When the light source update is not completed correctly during the program timer, it is executed

again automatically for the carrier to be set during the daily setup.

Note

• As for the other carriers except the one to be set during the program timer, update the light

source when replacing the carrier or switching the lane.

Yet, it is necessary to perform the Light Source Update when using the film carrier 24 hours

after the last performance of the Light Source Upgrade.