Specifications

Colorimeter

Changes from the conventional machines

• It is possible to set the maximum-sized paper in the

Colorimeter without cutting it.

• The calibration plate is built into the colorimeter.

• When measuring test prints or calibration plate, they are

touched to the colorimeter by using the pressure change

solenoid. By doing so, the precision of color measuring is

improved because they are less influenced by outside light.

2150

33_2

Important

• It is very important to clean the calibration plate because the gradation from white to black

changes by the dirt on the plate.

• Clean the calibration plate with a neutral detergent and water.

The Maintenance Manual [Cleaning the Calibration plate]