Specifications

Blue photosensitive

Green photosensitive

Red photosensitive

Base layer

Protective layer

Dust

LED light source side

Negative

Scanner side

Scratches and dust which can be corrected

(e.g.)In case of color negative

2140

33_2

Scratches and dust which can or cannot be corrected

xxxx

Digital Masking: Option

x--x

DIGITAL ICE: Standard

x: possible

Explanation

• The DIGITAL ICE deletes the dust or scratch, which is stuck to the film surface, automatically.

• When the Digital Masking unit is installed, it is possible to delete the scratches such as the

scratch reaches photosensitive from the protective coat.

• However, it is impossible to delete the deep scratches such as the scratch reaches the red

photosensitive from the protective coat or the scratch reaches the red photosensitive from the

base layer.

• The DIGITAL ICE does not function normally when a lot of silver is included in the part where

the image is created, like in case of monochrome films and desilvering.

• In the Kodachrome films, the effect of DIGITAL ICE is weak to the high density or low

density of a film, and the scanned image will deteriorate.

Turn OFF the function of DIGITAL ICE before printing.

You can set the function of DIGITAL ICE ON or OFF in the “Operator Selections”.

(However, in case of monochrome film, the DIGITAL ICE is turned OFF automatically.)

Note

• It is not possible to remove fingerprints because the IR (the LED light source) cannot detect oil.

• The “blurring caused by the roller pressure” cannot be corrected.