Specifications

Cautions when replacing PCBs (Personal computers)

Recovery-111-Hard disk drive

BIOS setting---1ATX mother board

RAID card setting----

RAID Card

OthersVSJDPCB

33_7

7090

D:DIP switch setting

J:Confirming the connector for the jumper (Set it as same as before replacing).

S:Reading the System program.

B: Reading the backup data

V:Necessary to adjust the potentiometer

1:Execute

-:Not execute

For details, refer to the PC Manual.

Note

• The PCBs mentioned in the Slide are the PCBs that need to be replaced with care.

• RAID card is compatible only with the high spec PC.