Specifications

Cautions when replacing PCBs (Scanner section)

The sensor standard adjustment of

each AFC, MMC, and AMC

-11-1AFC/scanner control PCB

LED Light Source Kit 1 or LED

Light Source Kit 2 may be necessary

when replacing one LED driver to

the other LED drivers (Refer to the

65020 in the Service Manual for

more details).

-----LED driver PCB

VBSOthersJDPCB

D:DIP switch setting (Set it as same as before replacing.)

J:Confirming the connector for the jumper (Set it as same as before replacing).

S:Reading the System program.

B: Reading the backup data

V:Necessary to adjust the potentiometer

1:Execute

-:Not execute

33_7

7050

Note

• The PCBs mentioned in the Slide are the PCBs that need to be replaced with care.