Specifications

13
Color data configuration
Storage media
Monitor
Monitor setup
Making the gamma table
Laser setup
Paper gamma 1, 2, 3
Printer profile
AOM bias characteristic data
Print
Paper temperature change
correction
Paper setup
Black balance
N
Light source registration control data
Scanner parameter
Parameter 1, 2, 3
Service parameter
01 to 700 Channel balance value
U, N, O
U, N, O
N (C,H, P)
Digital image
auto correction
(Digital camera)
Negative films
Positive films
Storage media
(Digital camera)
Scanner profile
CCD suppression strength
Digital image
auto correction
(Others)
Storage media
(Others)
33_5
Positive film auto
correction (120)
5110
Monitor hard setting
Brightness adjustment
Contrast adjustment
Negative slope correction Positive slope correction
Scanner slope (for master
and size each) contrast,
Chroma
Scanner slope (for master
and size each), DX slope,
contrast, Chroma
Negative key change ratio
Positive key change ratio Media key change ratio
Positive
film auto
correction
(Others)
Explanation
• Color data correction
Film: Make a correction for the scanner slope.
Media: Make a correction for CH balance and set the channel only for media if necessary.
• Explain the contents of Parameter 1 and service parameter.
Refer to the Service Manual [32590], [32500].
• The storage media is classified into following types.
When the data is Exif : [Digital camera]
When the data is other than Exif : [Others]
• As for the images scanned from FB scanner, [Digital Image Auto Correction] is not effective.
www.minilablaser.com