Specifications

Paper registration and setup

Correct this when the paper specification and the emulsion number is

changed.

Emulsion number change

Carry out the color correction for each magazine.Paper setup

When newly adding the paper with different paper width and different

paper surface, register a new magazine and carry out the correction.

Magazine Registration Setup

types can be set.

Paper Specification

Registration/Setup

ContentsTypes of registration

33_5

5090

Explanation

• The paper specification registration/setup is the setup when installing a machine. Carry out this

also when adding a new paper with different specification.

• Make sure to turn [ON] the [High Density Setup Switch] ([Paper Specification

Registration/Setup] → [Functions] → [Setup Switch] → [High Density Setup Switch]) when

installing the machine

• You can check the setup status (“OK” or “-”) for each magazine in the following modes.

Paper Specification, Magazine Registration, Emulsion number change

• You cannot carry out the “Emulsion number change” if the “Paper Specification/Setup”,

“Magazine Registration/Setup” has not been completed yet.

• Regarding the Magazine Registration/Setup and the Daily Setup, it was conventionally not

possible to set up other photosensitive materials when not completing the setup of the first

photosensitive material.In contrast, the QSS-32 and 33 series have the added function that can

perform printing test up to 3 (maximum) when using several types of papers or magazines.This

shortened the time to perform the setup.

• Refer to the Service Manual 32510 for details of the paper specification registration/setup.

• Refer to the Service Manual 32520 for details of the magazine registration/setup.

Note

• Explain the meaning of the sign for setup status in the “Emulsion number change”.